Zaɓin wani nau'in kayan aiki ne na pneumatic wanda ake amfani dashi sosai a masana'antar ma'adinai da masana'antar gine-gine.Amma yadda za a rage vibration na karban rike ya zama wani gaggawa fasaha matsala da za a warware ta ma'aikata kariya.Yadda za a yi zaɓe muddin kuna so?Ƙarfi mai zuwa don gaya muku hanya mai zuwa.
1. Diamita na ciki na bututun iska zai zama 16 mm, kuma tsawonsa bazai wuce mita 12 ba.Dole ne a kiyaye matsa lamba na iska a 5-6 mpa, kuma dole ne a kiyaye haɗin bututun iska mai tsabta da haɗin gwiwa.
2. Lokacin da ake ɗora kayan zaɓe, duba ratar da ta dace tsakanin wutsiya na zaɓin da bit, sannan a hankali danna matsi zuwa jagorar hakowa ta hanyar riƙon hannu don yin aikin zaɓen akai-akai.
3. Lokacin da zaɓin yana aiki akai-akai, ƙara man mai mai laushi (man mai turbine tare da danko na 3-4.5 ° E50) kowane sa'o'i 2-3 kuma a yi masa allura a bututun haɗin gwiwa.
4, a lokacin da ake chiseling mai laushin tama, kar a sanya duk abin da aka sanya a cikin takin takin, don kare iska.
5. Idan fil ɗin karban ya makale a cikin haɗin gwiwar dutsen, kada a girgiza sama don hana lalacewa ga sassan da aka haɗa.
6. Idan datti ya toshe allon tacewa, za a cire shi cikin lokaci, kuma ba za a cire allon tacewa ba.
7. Za a rika harhada tsinken a kalla sau biyu a mako yayin da ake amfani da shi, sannan a tsaftace man dizal, a busasshe sannan a shafe shi da mai kafin a hadawa da gwadawa.
8. Idan ba a yi amfani da tsinkar na dogon lokaci ba, ya kamata a cire shi don tsaftacewa, hatimin mai da kuma ajiya.
Lokacin aikawa: Afrilu-09-2020
